Coax cable driver ic

The MAX is a +V adaptive cable equalizer and cable driver implemented together on a single chip. It is designed for coaxial and twin-axial cable point-to-point communications applications. The driver features differ-ential current-mode logic (CML) inputs and outputs as well as adjustable output amplitude. The equalizer.  · emitter-follower transistor driving a coax cable loaded with 50 ohms at the far end. The 2n can easily drive mA for a 3V TTL swing into 50 ohms, without excessively loading down the TTL source, and the ohm termination resistor provides rapid pulldown at the end of the pulse. I'm not sure if this simple circuit will work to 25MHz. Thanks, - Win. drive coaxial cables. The device is especially useful in digital video broadcasting applications; for this application, since the system is polarity free, each output can be used as an independent driver. The driver produces swings 70% larger than a standard ECL output. When driving a coaxial cable, proper termination is required at both ends of.

The MAX has four independent adaptive cable equalizers and cable drivers on a single chip. It is designed for coaxial and twin-axial cable point-to-point scrambled-data communication applications. The driver features differential current-mode logic (CML) inputs and outputs. The equalizer includes differential CML data. The signal is isolated and converted from V to 5V using a digital isolator. The signal needs to be driven over a 50 ohm coaxial cable. The load impedance ranges from 50 ohms to 1 Mohm. Currently, I use a Philips (NXP) 74F NAND Driver. The chip has 4 outputs, 2 of which I parallel together for increased drive strength. The other 2 are NC. The LMH 3 Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer / Cable Driver provides a single chip interface to a BNC. The device can be configured either in the input mode as an equalizer to receive data over coaxial cable or in the output mode as a cable driver to transmit data over coaxial cable.

A PoC filter consisting of one or more inductors and chip beads is used on the PoC filter inductor (single layer structure) / Coaxial cable: m. logic IC designed for this? Thanks for any info. Click to expand Isn't the usual procedure to use twin axial cable and a line driver/. Availability: 0. SMFEP HUBER+SUHNER. Enlarge. Manufacturer: HUBER+SUHNER. Mfg Part No: Description: RF Coaxial Cable. Min/Mult/1.